Click on the links below for the appropriate Technical Data Sheet:

 

Acrylic Waterproofing Sealer

About Imagine AZ

Surface must be clean of all grease, oil and dirt. We suggest a mild soap and water wash followed by 3000 p.s.i. powerwashing. Rinse well and allow surface to dry. Note: surface moisture will cause this material to form a white haze. The application surface MUST be dry.

 

 

Acrylic Deck Coating

About Imagine AZ

Made from 100% Acrylic Polymer and designed to withstand the rigors a deck coating must endure. Formulated with concrete in mind, our Deck Coating is Acrylic tough and can hold up not only to Arizona summer heat, it will perform equally as well in freezing temperatures in our coldest states.

 

 

Acrylic Surfaces Additive

About Imagine AZ

Our Acrylic Additive is made from 100% Acrylic Polymer and designed to be used as a Bond Coat (apply to surface before texture step or painting) and be used as an admixture for Imagine Surfaces Texture and Stamp mix.

 

 

Aqua Seal Epoxy

About Imagine AZ

Aqua Seal Epoxy is a waterborne two component waterbase epoxy. Designed for use where hardness, chemical resistance and hot tire pick-up resistance are a must. Aqua Seal has excellent adhesion to many substrates. Cement and cementous surfaces, wood, steel and aluminum.

 

 

Solids Epoxy (Crack Fill)

About Imagine AZ

100% Epoxy is a two component Epoxy material designed for maximum adhesion and hardness for use in filling cracks in concrete. Chase the crack with a diamond concrete blade, clean area with power washer, let dry, mix equal parts Epoxy A & B, let stand 15 minutes mix again, pour into crack.

 

 

Texture Surfaces Mix

About Imagine AZ

Our Imagine Surfaces Texture Mix is a highly developed blend of silica sands, state of the art additives and white Portland Cement specifically formulated to be used as a thin section decorative overlayment.